DOPE-RBD50 Long Robot Handlebars for HONDA Rebel 250/300/500
○Part Number
DOPE-RBD50
○Compatible Models
REBEL250/300/500, CMX250/300/500 *Not compatible with 2025 models.
○Model Number
8BK-MC49, 2BK-MC49, 8BL-PC60, 2BL-PC60,
○Color
Black
○Installation Time
Standard 100 minutes, S Edition 120 minutes
○Installation Difficulty
★★★It is safer to ask a professional or engineer. Since it involves the brakes, please do not attempt to install it yourself. Please have it installed at our shop or a motorcycle shop. Also, if there are any defects or missing parts, please direct all inquiries regarding installation through the motorcycle shop that will be performing the installation.
We cannot answer installation inquiries from general customers.
○Installation Instructions
Remove the genuine lever, switch box, grip, and meter. Extend the brake hose. Install the switch box to match the hole in the handlebars.
※Due to variations in paint thickness, there may be a gap between the switch box and the switch box hole on the handlebars. In such cases, please use a 5.2mm drill bit to enlarge the hole.
○Product Description
Made of steel. Approximately 10cm higher than genuine. Includes weights. Brake hose extension is required. *Please choose either "handlebar only" or "with brake hose".
If you raise the handlebar height, the base of the handlebars will wobble with the genuine rubber riser bushings. Therefore,we recommend replacing them with DOPE-RBD10 Riser Bushings.
Video of bushing replacement →https://youtu.be/Z41x6o-S7RQ
When replacing the handlebars, we recommend replacing the grips with DOPE-RBD31 Grips.
※The genuine grips cannot be peeled off the handlebars (due to being glued).
Brake bleeding is required. *Genuine Honda brake fluid is recommended.
